Advertisement
WRAPAROUND FRONT STRAIGHT (Stainless Steel)
YOU MUST USE ANTI-SEIZE ON ALL STAINLESS STEEL NUTS AND BOLTS
TO PREVENT GALLING, CROSS-THREADING, AND FROZEN HARDWARE.
Assembly Steps:
1. Locate the area where the unit will be mounted in the tunnel. Refer to the
Mounting Location Diagram.
2. The Wraparound requires a ceiling height of 10'-3".
FRONT
D/SIDE
ARM
PECO Corporation – 244 Rex Boulevard – Auburn Hills – Michigan – 48326 – USA – 1-248-299-5800
07/14/23
S:\Engineering Doc's\Manuals & Packing Lists Combined\WRAP WASHERS\997206 WA721FSs_V2.doc
Installation Procedures
12'-6" [3.81]
3'-2 1 2 " [0.98]
FROM INSIDE EDGE
OF CONVEYOR GUIDE RAIL
TO FOOT PAD
C L
www.PECOCARWASH.com
FRONT
P/SIDE
ARM
997206AY51
Page 5 of 33
Advertisement
