Latch Rod Assembly Installation - Peco Estate 793603 Operator's Manual

Latch Rod Assembly Installation

The following instructions are for the installation of the Latch Rod Assembly to the Right side of your collection unit.
The instructions for the Left side is identical to those shown.
To install the Latch Rod Assembly (Item #1), first loosely install the Latch Rod Assy to the Right Latch Release Lever
(Item #2) by using (2) 1/2"-13 Flange Nuts (Item #3). Insert the Latch Release Lever through the Latch Guide at the
base of the Door Rail Assembly and over the Door's lower hinge. See Figure B.
Once positioned secure the front end of the Latch Rod Assy by to the Latch Assembly by using (1) 1/2" Flat Washer
(Item #4) and (1) Rue Ring Cotter Pin (Item #5). See Figure A and Figure C. Repeat the procedures for the Left side.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Figure B
Slide the Latch Release Lever through the
Latch Guide at the base of the Vertical
Rail and over the Door's lower hinge
Figure C
Secure Latch Rod Assembly
to the Latch Assembly
17