Table of Contents
Advertisement
Universal Battery Kit Installation (Cont.)
Position the Battery Box (Item #2) over the Rubber Shock Absorber (Item #5) and over the Engine Mount Plate of the
Tongue Assembly (Item #1). Secure the Battery Box by using (2) 5/16"-18 x 3/4" HHCS (Item #6) and (2) 5/16"-18 Ny-
Flange Lock Nuts (item #7).
Next, place the Battery (Item #3) in the Battery Box and secure the Battery by using (1) Battery Clamp (Item #4), (2)
1/4"-20 x 4-1/2" Carriage Bolts (Item #8) and (2) 1/4"-20 Wing Nuts (Item #9). Be Sure the Battery Clamp is positioned
between the battery's positive (+) and negative (-) terminal to prevent any possibility of the battery to arc. Refer to the
Figure Below.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
25
Advertisement
Table of Contents
