Table of Contents
Advertisement
Engine Installation
First, place (2) Rubber Shock Absorber (Item #3) on top of the Engine Mount Assembly (Item #2) aligning the bolt
holes. Next, position the Engine Assembly (Item #1) on top of the Shock Absorbers aligning the bolt holes of all the
parts. Finally, secure the Engine by using (4) 5/16"-18 x 2" HHCS (Item #4) and (4) 5/16"-18 Nyloc Nuts (Item #5).
Refer to Figure A.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Tongue Assembly Installation
Pasture Vac Unit Instructions
Position the Tongue Assembly (Item #1) between the Tongue Support Bracket of the 50 Trailer Assembly aligning the
bolt holes of both parts. Secure the Tongue Assy by using (3) 1/2"-13 x 3-1/2" HHCS (Item #2) and (3) 1/2"-13 Flange
Nuts (Item #3). See Figure B.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure B
Tongue Support
Bracket
22
Advertisement
Table of Contents
