Table of Contents
Advertisement
Support Rail Installation
Position the Side Support Rail (Item #1) over the Door Rail Assembly and Side Panel aligning the bolt holes of these
parts. Refer to Figure A.
Secure the Side Support Rail relatively loose by using (2) 5/16"-18 x 3/4" Carriage Bolts (Item #2) on the middle and
bottom mount holes of the Support Rail, (1) 5/16"-18 x 1" Carriage Bolts (Item #3) on the top mounting hole of the rail
and (3) 5/16"-18 Flange Nuts (Item #4). Refer to Figure A.
Repeat the same procedure for the other side. Make sure all hardware are secured relatively loose.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
11
Advertisement
Table of Contents
