Inlet Arm Assembly Installation - Peco Estate 793603 Operator's Manual

Inlet Arm Assembly Installation

Position the Inlet Arm Assembly (Item #1) and Foam Seal (Item #2) into the Inlet Cone as shown in Figure A. Place
the Inlet Arm Assy over the Chassis Frame Assembly's (Item #3) Inlet Mount Plate, see Figure A and Figure B. Secure
the Inlet Arm Assy by using (2) 3/8"-16 x 1" Carriage Bolts (Item #4) and (2) 3/8"-16 Flange Nuts (Item #5).
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Figure B
18
Inlet Cone
Right Side View
2