Door Rail Assembly Installation
Position the Right Door Rail Assembly (Item #1) onto the right Side Panel aligning all bolt holes to those of the Side
Panel. For this step, the top (2) bolt holes will remain open and not use any hardware.
Secure the Right Vertical Rail Assy relatively loose by using (4) 5/16"-18 x 3/4" Carriage Bolt (Item #3) and (4) 5/16"-
18 Flange Nut (Item #4) on the lower (4) bolt holes. Refer to Figure A.
Repeat the same procedure for the Left side. Make sure all hardware are secured relatively loose.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
4
4
4
4
10
Right
Left