Table of Contents
Advertisement
Diagonal Rail Installation
Position the Diagonal Rail (Item #1) over the Vertical Rail Assembly and Side Panel aligning the bolt holes of these
parts. Refer to Figure A.
Secure the Diagonal Rail relatively loose by using (2) 5/16"-18 x 3/4" Carriage Bolts (Item #2) on the top and bottom
Rail, (2) 5/16"-18 x 1" Carriage Bolts (Item #3) on the middle of the rail and (4) 5/16"-18 Flange Nuts (Item #4). Refer
to Figure A.
Repeat the same procedure for the other side. Make sure all hardware are secured relatively loose.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Side Panel
Vertical
Rail
11
Advertisement
Table of Contents
