Nexcom NEX 650-ADU User Manual page 55

Chapter 3: BIOS Setup
PPM Configuration
This section is used to configure the Processor Power Management (PPM)
configuration.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
PPM Configuration
CPU C state Report [Disabled]
[Disabled]
S0ix
Version 2.17.1249. Copyright (C) 2017 American Megatrends, Inc.
CPU C State Report
Enables or disables CPU C-State report to OS.
S0ix
Enables or disables CPU S0ix state.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
IDE Configuration
This section is used to configure the SATA drives.
Enable/Disable CPU C-State
report to OS.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial-ATA (SATA)
Enables or disables the SATA device.
SATA Test Mode
Enables or disables SATA test mode.
Serial-ATA Port 0 and Serial-ATA Port 1
Enables or disables SATA port 0 and SATA port 1.
SATA Port0 Hotplug and SATA Port1 Hotplug
Enables or disables hotplug support on SATA port 0 and SATA port 1.
41
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
IDE Configuration
Serial-ATA (SATA) [Enabled]
SATA Test Mode [Disabled]
SATA Mode [AHCI Mode]
Serial-ATA Port 0 [Enabled]
SATA Port0 HotPlug [Enabled]
Serial-ATA Port 1 [Enabled]
SATA Port1 HotPlug [Enabled]
SATA Port0
Not Present
SATA Port1
Not Present
Version 2.17.1249. Copyright (C) 2017 American Megatrends, Inc.
Enable / Disable Serial ATA
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 650-ADU User Manual