Advertisement
Interface
Δ
1. Main Interface
First line:
Display DMX address is "1"
Second line: Display the present inner core temperature and the temperature progress bar;
isplays remaining time is 7 minutes and 24 seconds
2. Error Information
Error information
E0 System IC
E2 Temp. Sensor
E3 P Temp. Over
E4 Time Remain
E5 K Temp. Over
E6 Heat Fail
E7 Tip Over
3. Setting Menu
Press "MENU" to enter the Setting interface, press the "MENU" button to enter different
options until you return to the main interface
Options
Range
Set DMX Address
1-512
Wireless Control
ON/OFF
Manual Fountain
ON/OFF
4. Advanced Menu
Press and hold "MENU" for 3 seconds to enter the advanced setup interface, press MENU key
to enter different options, wait 3 seconds to return to the main interface.
Options
Set Temperature
480-620
Auto Heat
ON/OFF
Density
Mode Selection
Factory Mode User Mode Factory Mode is factory debugging mode,
Systematic error
Temperature sensor is not connected or damage
Chassis over-temperature
Insufficient granules or remaining time, please swiping time card
Heating chamber over-temperature
Heating failed
Machine slant over 45 degrees.
Default
Set the DMX address, machine become a wireless host
1
and can send out DMX signal when its address is
"1++"
Wireless function switch, you can match machine with
ON
remote controller when at "ON" status
OFF
Manual fountain switch , for testing purposes only
Default
Range
550
ON
70-100
90
Explanation
Explanation
Explanation
Setup inner Core temperature
Auto preheat function switch after turn on
machine
Adjust the sparks density
Advertisement
Need help?
Do you have a question about the SPARKULAR mini and is the answer not in the manual?
Questions and answers