11.5
Removing the fork protector
11.6
Installing the fork protector
SERVICE WORK ON THE CHASSIS 11
Universal oil spray (
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
Remove screws
–
Remove screws
–
Remove screws
A01213-10
–
Position the fork protector on left fork leg. Mount and tighten
1
screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
2
screws
.
–
Position the fork protector on the right fork leg. Mount and
tighten screws
A01213-11
Guideline
Remaining screws,
chassis
p. 147)
p. 53)
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
M6
10 Nm (7.4 lbf ft)
3
.
M6
10 Nm (7.4 lbf ft)
p. 51)
53