Table of Contents
Advertisement
13.7
Checking the spoke tension
Warning
Danger of accidents Incorrectly tensioned spokes impair the handling characteristic and result in
secondary damage.
The spokes break due to being overloaded if they are too tightly tensioned. If the tension in the spokes
is too low, then lateral and radial run-out will form in the wheel. Other spokes will become looser as a
result.
–
Check spoke tension regularly, and in particular on a new vehicle. (Your authorized
Husqvarna Motorcycles workshop will be glad to help.)
–
Strike each spoke briefly using a screwdriver blade.
Info
The frequency of the sound depends on the spoke
length and spoke diameter.
If spokes of the same length and diameter vibrate with
a different tone, this is an indication that the spoke
tensions differ.
You should hear a high note.
400694-01
»
If the spoke tension differs:
–
Correct the spoke tension.
–
Check the spoke torque.
Guideline
Spoke nipple, front
wheel
Spoke nipple, rear
wheel
Torque wrench kit (58429094000)
WHEELS, TIRES 13
M4.5
6 Nm (4.4 lbf ft)
M4.5
6 Nm (4.4 lbf ft)
103
Advertisement
Table of Contents
