Installing The Main Silencer; Changing The Glass Fiber Yarn Filling Of The Main Silencer - Husqvarna FC 350 2023 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.33
11.34
72
A01181-10

Installing the main silencer

A01181-11

Changing the glass fiber yarn filling of the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn filling escape and the damper "burns" out.
Not only is the noise level higher, but the performance characteristics change.
–
1
Detach spring .
Spring hook (50305017000C1)
–
2
Remove screws with the washers and take off the main
silencer.
–
Position the main silencer.
–
1
Mount screws with washers, but do not tighten yet.
–
2
Attach spring .
Spring hook (50305017000C1)
–
1
Tighten screws .
Guideline
Remaining screws,
chassis
Preparatory work
–
Remove main silencer. (
M6 10 Nm (7.4 lbf ft)
p. 71)