Table of Contents
Advertisement
11.12
Installing the lower triple clamp
SERVICE WORK ON THE CHASSIS 11
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Push on the steering head seal
A01192-10
–
Position the upper triple clamp and handlebar.
–
Mount screw
Guideline
Screw, top steering
head
A01190-11
–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the upper edge of the upper triple
F03764-10
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
p. 146)
1
.
2
, but do not tighten it yet.
M20x1.5
12 Nm (8.9 lbf ft)
3
of the right fork leg is positioned to
of the left fork leg faces the front.
57
Advertisement
Table of Contents
