The Function Table - A&D HV-G Series Instruction Manual

The function table is provided to store and reference items that determine the
performance of the scale. Each item has a parameter.
The parameters are maintained even without power applied.
Step 1 Turn off the display.
Press the
pressed and held. The function table is displayed.
Step 2 Set parameters for each item using the following
switches.
^
switch
<
switch
switch
F
switch Storing a parameter for the current
ENTER
Step 3 Press the
end
when
Note Pressing the
stored in the scale.
switch while the
ON/OFF
Selecting the parameter of an item.
Selecting the value of a digit at f16.
Selecting a digit at f16..
Proceeding to the end of the table
without storing the parameter.
item and proceeding to the next item.
Returning to normal mode from the
end of the table.
switch to return to the normal mode,
ENTER
is displayed.
switch on step 2, the parameter is
ENTER
HV-G Instruction Manual Page 43
switch is
ZERO