Table of Contents
Advertisement
20
Backlight control
Beeps while primary source
22
is interrupted
Overload bypass:
When enabled, the unit will
23
transfer to line mode if
overload occurs in battery
mode.
25
Record Fault code
Bulk charging voltage
26
(C.V voltage)
Stay at latest screen
Backlight on (default)
Alarm on (default)
Bypass disable (default)
Record enable (default)
default: 56.4V
If self-defined is selected in program 5, this program can be set
up. Setting range is from 48.0V to 62.0V. Increment of each
click is 0.1V.
20
If selected, the display screen will
stay at latest screen user finally
switches.
Backlight off
Alarm off
Bypass enable
Record disable
Advertisement
Table of Contents
