Table of Contents
Advertisement
Product Overview
NOTE: For parallel installation and operation, please check
1. LCD display
2. Status indicator
3. Charging indicator
4. Fault indicator
5. Function buttons
6. Power on/off switch
7. AC input connectors
8. AC output connectors (Load connection)
9. PV connectors
10. Battery connectors
11. Remote LCD module communication
Port
12. Current sharing port
Appendix I.
13. Parallel communication port
14. Dry contact
15. USB port as USB communication port and USB function
port
16. BMS communication port: CAN, RS-485 or RS-232
17. Output source indicators (refer to OPERATION/Operation
and Display Panel section for details) and USB function
setting reminder (refer to OPERATION/Function Setting for
the details)
18. RS-232 communication port
19. RGB LED bar (refer to LCD Setting section for the details)
20. 12V DC output connectors (option)
21. Power switch for DC output (option)
3
Advertisement
Table of Contents
