Table of Contents
Advertisement
BEFORE EMBROIDERING
d
Plug the connector of the embroidery foot "W+" with
LED pointer into the jack on the back left side of your
machine.
e
Touch
to unlock all keys and buttons.
All keys and operation buttons are unlocked, and the
previous screen is displayed.
About the Embroidery Unit
CAUTION
• Do not move the machine with the embroidery
unit attached. The embroidery unit could fall
off and cause injury.
IMPORTANT
• Keep your hands and foreign objects away
from the embroidery carriage and frame when
the machine is embroidering. Damage or
malfunction may result.
• Be sure to turn off the power before attaching
or removing the embroidery unit. Otherwise,
the machine may be damaged.
• Do not touch the inner connector of the
embroidery unit. The pins on the embroidery
unit connection may be damaged.
• Do not apply strong force to the embroidery
unit carriage or pick up the unit by the
carriage. Otherwise, the embroidery unit may
be damaged.
• Do not push on the carriage when attaching
the embroidery unit onto the machine. Moving
the carriage may damage the embroidery unit.
• Make sure that there is enough space for the
carriage of the embroidery unit to move. If the
embroidery frame comes into contact with an
object, the pattern may not be embroidered
correctly, or damage may result.
• Do not touch the embroidery carriage until the
initialization finishes.
104
Note
• To avoid distorting your embroidery design, do not
touch the embroidery carriage and frame when the
machine is embroidering.
• Store the embroidery unit in a safe place to prevent
damage to the unit.
Memo
• You can also sew utility/decorative stitches with
the embroidery unit attached. Touch
. The feed dogs will automatically raise for
utility and decorative stitching.
Attaching the Embroidery Unit
a
Turn the main power to OFF, and remove the flat bed
attachment.
b
Insert the embroidery unit connection into the
connection port of the machine until it snaps into
place.
Note
• Be sure there is no gap between the embroidery
unit and the machine. If there is a gap, the
embroidery patterns will not embroider with the
correct registration.
c
Turn the main power to ON.
The following message will appear.
d
Touch
.
The carriage will move to the initialization position.
and
Advertisement
Table of Contents
