Making Adjustments - Brother 882-W73 Operation Manual

 Saving Settings
Specified angles for start and end, finish tapering method,
and stitch settings can be saved in machine's memory.
a
After setting the tapering function, touch
b
Touch .
 Retrieving Saved Settings
a
Touch to retrieve the saved setting after
selecting pattern.
b
Touch the numbered key of the settings to be retrieved
and then touch .
* The settings cannot be retrieved if stitch tapering
function is set to [ON].
Memo
• For more information on saving and recalling
settings, refer to "Saving Your Stitch Settings" on
page 59.

MAKING ADJUSTMENTS

Your stitch pattern may sometimes turn out poorly,
.
depending on the type or thickness of fabric, the stabilizer
material used, sewing speed, etc. If your sewing does not
turn out well, sew trial stitches using the same conditions
as the real sewing, and adjust the stitch pattern as
explained below. If the stitch pattern does not turn out well
even after making adjustments based on the stitch pattern
described below, make adjustments for each stitch pattern
individually.
Memo
• For details on stitch patterns, refer to "STITCH
SETTING CHART" on page 197.
• This adjustment can be made to
stippling stitch),
stitch),
eyelet stitch),
and stitch patterns from the following categories.
a
Touch
b
Attach advanced monogramming foot "N+" and sew
the stitch pattern.
Be sure to use advanced monogramming foot "N+".
Adjustments may not be made correctly with any other
presser foot.
c
Compare the finished stitch pattern to the illustration
of the correct stitch pattern below.
d
Touch
the [Fine Adjust Verti.] or [Fine Adjust Horiz.] displays.
MAKING ADJUSTMENTS
(1-36 Quilting
(2-21 Decorative stippling
(4-24 Eyelet stitch), (4-25 Star
(Q-15 Quilting stippling stitch)
and select (6-284).
, and then adjust the stitch pattern with
3
95