About The Embroidery Unit; Removing The Embroidery Unit; Attaching The Embroidery Unit - Brother 882-D80 Operation Manual

About the Embroidery Unit

■ Removing the Embroidery Unit

a
Press either
(Embroidery Edit), then press
.
→ The carriage will move to the removal position.
CAUTION
• Always remove the embroidery frame before
pressing . Otherwise, the frame may
strike the embroidery foot, and possibly cause
injury.
• The embroidery unit will not fit in the shipping
carton box if this step is not done.
b
Turn the main power to OFF.
Note
• Be sure to turn off the machine before
removing the embroidery unit, otherwise
damage to the machine may result.
c
Hold down the release button, and pull the
embroidery unit away from the machine.
a Release button
(Embroidery) or
CAUTION
• Do not carry the embroidery unit by holding
the release button compartment.

■ Attaching the Embroidery Unit

CAUTION
• Do not move the machine with the embroidery
unit attached. The embroidery unit could fall
off and cause injury.
• Keep your hands and foreign objects away
from the embroidery carriage and frame when
the machine is embroidering. Otherwise,
injury may result.
• To avoid distorting your embroidery design, do
not touch the embroidery carriage and frame
when the machine is embroidering.
Note
• Be sure to turn off the power before
installing the embroidery unit. Otherwise,
the machine may be damaged.
• Do not touch the inner connector of the
embroidery unit. The pins on the
embroidery unit connection may be
damaged.
• Do not apply strong force to the embroidery
unit carriage or pick up the unit by the
carriage. Otherwise, the embroidery unit
may be damaged.
• When not using or when transporting the
embroidery unit, pack it securely in the
shipping carton box.
a
Turn the main power to OFF.
BEFORE EMBROIDERING
Basic operations B-47
B
1