Brother 882-W73 Operation Manual page 137

Note
• If is displayed to the left of the positioning keys,
the LED pointer has shifted from its initial position.
Touch to adjust the position.
l
Touch .
m
Touch the positioning keys to move the embroidery
frame until the position of the LED pointer and the
center of the second mark are aligned.
To change the speed that the frame moves, use the
frame movement speed keys. If it is difficult to make a
precision alignment, touch a frame movement speed
key for a slower speed.
1 Positioning keys
2 Frame movement speed keys
3 Center of the second mark
4 Light of the LED pointer
THE 2-POINT EMBROIDERY POSITIONING FUNCTION
• Set the position of the LED pointer to a position
• In order to increase the accuracy of the pattern
n
Touch
 The pattern is repositioned.
o
Press the "Start/Stop" button to start embroidering.
 Another example
By specifying an alignment point and direction,
embroidery patterns can be positioned and aligned for
various purposes.
In this example, a pattern is aligned at the left center of the
towel.
1
2
a
Use a chalk pencil to mark the desired embroidering
position.
The line drawn for the reference direction should be
longer.
c
1 Chalk pencil mark
Note
that is not too close to the first reference point. If it
is too close, a message will appear, prompting you
to reposition it.
alignment, align the position of the LED pointer
above the second mark (3) and as far away from
the center mark as possible.
.
a
4
135