Figure 3: User Group 122 Example; Table 28: Bsfk User Code Report; User; U### Passcode - Bosch D9412G Program Entry Manual

D9412G/D7412G | Program Entry Guide | 3.0 RADXUSR1/RADXUSR2

Figure 3: User Group 122 Example

Master User:
1 ID 122.
♦ CRD ID 122-0
♦ Sub User -1: ID 122-1
CRD ID 122-1
2
♦ Sub User -2: ID 122-2.
CRD ID 122-2
♦ Sub User -3: ID 122-3.
CRD ID 122-3
0101
In reporting systems using modem format, all three digits of the User ID Code are transmitted to the
0101
0101 central station with appropriate reports. Central station automation computer systems may only accept
Zonex and COMEX style User Ids. See Point/User Flag in Section 2.1 Phone.
In BFSK, only one number is transmitted. This number represents a group of ten users as shown in Table 28. Users
100 through 249 do not report in BFSK format.

Table 28: BSFK User Code Report

User Code User Code
000 to 009 010 to 019
BFSK BFSK
Report Report
0 1

User ###

Default: 001
Selection: 000 or 001 to 249 (001 to 099 for the
D7412G)
Enter the User number you are programming.
0101
User 000 is the Service Authority Level
0101
(Level 15). You cannot change the
0101
programming for user 000.
Only the Service Authority Level (User
000) can delete User 000. When a user
other than User 000 tries to delete the
passcode for User 000, the command
center displays NOT IN USE.
User 000 cannot be added/changed at
the command center whether it exists or
not.
Bosch Security Systems | 10/03 | 47775E
User Code User Code User Code
020 to 029 030 to 039 040 to 049
BFSK BFSK
Report Report
2 3
1 - User passcode
2 - User token/card
User Code User Code
050 to 059 060 to 069
BFSK BFSK BFSK
Report Report Report
4 5

U### Passcode

Default:
Selection:
Enter three to six digits to enable a passcode for the
master user in this group.
0101
User I.D.000 is the Service Passcode. The
0101
default Service Passcode is 123.
0101
The programmer does not allow you to
enter any passcode number that could
conflict with a duress passcode. If Duress
Type is a 1, passcodes within a range of 1
for existing passcodes cannot be entered.
This rule applies even if duress is disabled.
For example, once a passcode of 654321
is entered, 654322, 654323, 654320,
and 654329 cannot be entered.
User Code User Code
070 to 079 080 to 089
BFSK BFSK
Report Report
6 7 8
Program Record Sheet
See
Three to six digits ( 0 to 9)
EN | 74
User Code
090 to 099
BFSK
Report
9