Table of Contents
Advertisement
SSG-6029P-E1CR12H/L/T User's Manual
3.5 Attaching a JBOD Expansion Chassis
The SSG-6029P-E1CR12H/L/T features a dual JBOD expansion port. The JBOD attachment
will vary depending on the specific JBOD chassis that is being connected. The JBOD image
below is provided for illustrative purposes only; port location and routing specifications are
subject to change. Please follow the instructions provided with the JBOD.
Note: The use of two cables (8x SAS lanes) is recommended.
Figure 3-11. JBOD Expansion Port
45
JBOD OUT (downstream ports)
JBOD IN
Advertisement
Table of Contents
