Supermicro SuperStorage SSG-6029P-E1CR12H User Manual page 22

SSG-6029P-E1CR12H/L/T User's Manual
F.
SCREW
1
2
Installing the Chassis into a Rack
1. Extend the outer rails as illustrated above.
2. Align the inner rails of the chassis with the outer rails on the rack.
3. Slide the inner rails into the outer rails, keeping the pressure even on both sides. When
the chassis has been pushed completely into the rack, it should click into the locked
position.
screw the handles the
outer rails for secure
purpose if necessary
4. Optional screws may be used to secure the front of the chassis to the rack.
Note: Figure is for illustrative purposes only. Always install servers to the bottom of a rack first..
Figure 2-3. Installing the Rack Rails
SCREW
COMPLETE
ABLECOM
DATE:2008/08/14
REV:2
22