Supermicro SuperStorage SSG-6029P-E1CR12H User Manual page 75

Page Policy
Use this feature to set the page policy for onboard memory support. The options are Closed,
Adaptive, and Auto.
IMC Interleaving
Use this feature to configure interleaving settings for the IMC (Integrated Memory
Controller), which will improve memory performance. The options are 1-way Interleaving,
2-way Interleaving, and Auto.
Memory Topology

This item displays the information of onboard memory modules as detected by the
BIOS.
•
P1 DIMMA1/P1 DIMMA2/P1 DIMMB1/P1 DIMMC1/P1 DIMMD1/P1 DIMMD2/P1
DIMME1/P1 DIMMF1/
•
P2 DIMMA1/P2 DIMMA2/P2 DIMMB1/P2 DIMMC1/P2 DIMMD1/P2 DIMMD2/P2
DIMME1/P2 DIMMF1
Memory RAS (Reliability_Availability_Serviceability) Configuration

Use this submenu to configure the following Memory RAS settings.
Static Virtual Lockstep Mode
Select Enable to support Static Virtual Lockstep mode to enhance memory performance.
The options are Enable and Disable.
Mirror Mode
Use this feature to configure the mirror mode settings for all 1LM/2LM memory modules
installed in the system, which will create a duplicate copy of data stored in the memory to
increase memory security, but it will reduce the memory capacity by half. The options are
Disable, Mirror Mode 1LM, and Mirror Mode 2LM.
UEFI ARM Mirror
If this feature is set to Enable, mirror mode configuration settings for UEFI-based Address
Range memory will be activated upon system boot. This will create a duplicate copy of data
stored in the memory to increase memory security, but it will reduce the memory capacity
by half. The options are Disable and Enable.
Memory Rank Sparing
Select Enable to support memory-rank sparing to optimize memory performance. The
options are Enable and Disable.
Note: This item will not be available when memory mirror mode is enabled.
75
Chapter 6: BIOS