Hard Drive Carrier Indicators - Supermicro SuperStorage SSG-6029P-E1CR12H User Manual

SSG-6029P-E1CR12H/L/T User's Manual
Removing a Drive from a Drive Carrier
1. Remove the screws that secure the hard drive to the carrier and separate the hard drive
from the carrier.
2. Replace the carrier back into the drive bay.

Hard Drive Carrier Indicators

Each hard drive carrier has two LED indicators: an activity indicator and a status indicator. In
RAID configurations, the status indicator lights to indicate the status of the drive. In non-RAID
configurations, the status indicator remains off.
Figure 3-6. Installing a Drive Carrier into its Bay
Note: Enterprise level hard disk drives are recommended for use in Supermicro chassis and
servers. For information on recommended HDDs, visit the Supermicro website at
supermicro.com/products/nfo/files/storage/SBB-HDDCompList.pdf
Figure 3-5. Mounting a Drive in a Carrier
41
http://www.