Table of Contents
Advertisement
7 Return default parameters & firmware version
WARNING: Restore factory defaults
If you wish to return the scanner to all the factory default settings, scan the barcode above. But
Scanning mode remains unchanged.
Write to customer defaults
Write current parameter settings to the customer default settings. But Scanning mode remains
unchanged.
Restore customer defaults
Restore the customer default settings to current settings. If failed, restore the factory default
settings. But Scanning mode remains unchanged.
Firmware version list
If you wish to display the firmware version, scan the barcode above. If the interface is RS232 or USB
virtual COM, and Decode data format is set to packet, the firmware version will be packet and
transmitted.
78
Advertisement
Table of Contents
