Upc-E - Godex GS200 User Manual

3-8 UPC-E

Read:
Format
System character "0"
Check digit verification: The check digit verification is optional.
Check digit trans.: By setting Enable, check digit will be transmitted.
Code ID setting: Refer to Code ID setting of
Insert group selection: Refer to Insert group selection of
Supplement digits:
Format
System character "0"
Truncation/Expansion:
Truncate leading zeros - Refer to Truncation/Expansion of
Expand to EAN-13 - It extends to 13-digits with "0" digits when the feature is set to be enabled.
Example: Barcode "01236547", Output: "0012360000057".
Expand to UPC-A - It extends to 12-digits when the feature is set to be enabled.
Example: Barcode "01236547",
Output: "012360000057".
Truncate system character - The system character "0" of UPC-E data can be truncated when this
feature is enabled.
Add country code - The country code ("0" for USA) can be added when the feature is enabled.
Option barcode
Read
Check digit verification
Check digit trans.
3-7 UPC-A
Data digits (6 digits)
SETUP
Multiple-scan setting
Option
Disable
Enable
Disable
Enable
Disable
Enable
Data digits (6 digits)
.
3-7 UPC-A
.
Check digit
3-7 UPC-A
Alpha. value
00
01*
00
01*
00
01*
30
Check digits
Supplement digits 2 or 5
.
Single-scan setting
*
*
*