String Transmission - Godex GS200 User Manual

3-31 String transmission

Format of barcode data transmission:
Prefix Code name
Prefix transmission: By setting Enable, prefix will be appended before the data transmitted.
Suffix transmission: By setting Enable, suffix will be appended after the data is transmitted.
Code name transmission: By setting Enable, code name will be transmitted before code data.
Preamble transmission: By setting Enable, preamble will be appended before the data transmitted.
Postamble transmission: By setting Enable, postamble will be appended after the data is transmitted.
Code ID transmission: Code ID can be transmitted in the format of either Proprietary ID or AIM ID.
1-2 Default settings for various types of barcode
Refer to
Code length transmission: The length of code data string can be transmitted before the code data when
Enable is selected. The length is represented by a number with two digits.
Case conversion: The characters within code data or the whole output string can be set in either upper
case or lower case.
FN1 substitution transmission: The scanner supports a FN1 substitution feature for keyboard wedge,
USB and RS-232 interface. The replacement string of FN1 can be chosen by user (see
FN1 substitution string setting
Option bar code
Prefix transmission
Suffix transmission
Code name
transmission
Preamble transmission
Preamble Code ID
).
SETUP
Multiple-scan setting
Option
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Code length Code data Code ID Postamble
.
Alpha. value
00*
01
00
01*
00*
01
00*
01
72
3-29 G1-G4 &
Single-scan setting
*
*
*
*
Suffix