Work Area Safety - Terex GS32MT-101 Operator's Manual

First Edition • Third Printing
Work Ar ea Safety
Electrocution Hazards
This machine is not electrically insulated and will
not provide protection from contact with or
proximity to electrical current.
Line Voltage
0 to 50KV
50 to 200KV
200 to 350KV
350 to 500KV
500 to 750KV
750 to 1000KV
Allow for platform movement, electrical line sway
or sag, and beware of strong or gusty winds.
Do not operate the machine during lightning or
storms.
Do not use the machine as a ground for welding.
Part No. 1308591GT
Obey all local and
governmental
regulations regarding
required clearance from
electrical power lines. At
a minimum, the required
clearance contained in
the chart below must be
followed.
Required Clearance
10 ft 3.05 m
15 ft 4.60 m
20 ft 6.10 m
25 ft 7.62 m
35 ft 10.67 m
45 ft 13.72 m
Keep away from the
machine if it contacts
energized power lines.
Personnel on the ground
or in the platform must
not touch or operate the
machine until energized
power lines are shut off.
GS -1432m • GS
™ ™
Tip-over Hazards
Occupants, equipment and materials shall not
exceed the maximum platform capacity or the
maximum platform capacity of the platform
extension.
Maximum capacity
Platform
Model retracted
500 lbs
GS-1432m
227 kg
500 lbs
GS-1932m
227 kg
500 lbs
GS-1932m
227 kg
Lite
Platform retracted
The weight of options and accessories, such as
panel carriers, will reduce the rated platform
capacity and must be subtracted from the platform
capacity. See the decals with the options and
accessories.
If using accessories, read, understand and obey
the decals, instructions and manuals with the
accessory.
-1932m • GS -1932m Lite
™
Operator's Manual

Work Area Safety

Platform extended
Platform Extension
only only
250 lbs 250 lbs
113 kg 113 kg
250 lbs 250 lbs
113 kg 113 kg
250 lbs 250 lbs
113 kg 113 kg
Platform extended
Extension only Platform only
Maximum
occupants
Indoor – 2
Outdoor – 1
Indoor – 2
Outdoor – 1
Indoor – 1
Outdoor – 1
15