Terex GS32MT-101 Operator's Manual page 55

First Edition • Third Printing
To remove the height limit:
1 Turn the key switch to platform control.
2 Pull out the red Emergency Stop button to the
on position at the ground controls.
3 Pull out the red Emergency Stop button to the
on position at the platform controls.
4 Press and hold the lift function selection button
for 5 seconds, at any height.
5 The maximum platform height limit has been
removed when:
a The platform control LED displays
"FLHt", and
b The alarm beeps 7 times.
To test the platform height restriction:
1 Press and hold the lift function enable button,
and press the platform up button.
Result: The platform should raise to the
previously set height. After reaching the
maximum height restriction, platform
movement will stop. If the operator continues
holding the joystick in the elevate direction for
more than 2 seconds after reaching the
maximum platform height limit, the platform
alarm will beep for one second and LoHt is
displayed on the platform controls LED.
Note: The User Max Height option must be turned
on and a height must have previously been set.
Part No. 1308591GT GS -1432m • GS -1932m • GS
™ ™
Operating Instructions
-1932m Lite
™
Operator's Manual
53