Terex GS32MT-101 Operator's Manual page 53

First Edition • Third Printing
Lift Tools Work Tray Instructions
The Lift Tools Work Tray assembly consists of one
tray and two mounting brackets with hardware.
1 bolt, 1/4-20 x 0.75"
2 rubber bumper
3 lift tool work tray
4 tool tray bracket
5 decal, warning
Part No. 1308591GT GS -1432m • GS -1932m • GS
™ ™
Operating Instructions
Observe and Obey: Lift Tools
Work Tray Installation
Lift Tools Work Tray must be installed on the

inside of the platform.
Only one Lift Tools Work Tray can be used per

machine.
Mount Lift Tools Work Tray on the Extension

Deck rail on the opposite side of the PCON.
Lift Tools Work Tray can be on either upper or

lower rail.
Be sure the Lift Tools Work Tray is secured to

the platform.
Lift Tools Work Tray lanyard is for tools only.

Do not attach personal safety lanyard.
Lift Tools Work Tray Installation
1 Tighten the four 1/4-20 x 0.75 bolts (1).
-1932m Lite
™
Operator's Manual
51