Table of Contents
Advertisement
Operator's Manual
Operating Instructions
Lift Tools Pipe Cradle
Instructions
The Lift Tools Pipe Cradle assembly consists of
2 pipe cradles positioned at either side of the
platform and mounted to the guardrails with U-
bolts.
1
strap
2
bolt, 3/8-16 x 2"
3
cradle
4
edge trim
5
cap
6
nut, 3/8-16
7
strap brace
8
bolt, 1/4-20 x 3.25"
9
nut, 1/4-20
10 pin bracket
11 carriage bolt, 3/8-16 x 2.25"
12 spacer
13 foot mount
14 rubber bumper
15 large pipe cradle
48
GS
-1432m • GS
-1932m • GS
™
™
Observe and Obey:
Lift Tools Pipe Cradle must be mounted on the
inside of the platform.
Lift Tools Pipe Cradles cannot be used with
any other option, except Lift Tools Work Tray
and Lift Guard Contact Alarm.
Lift Tools Pipe Cradles must not obstruct the
platform controls or the platform entrance.
Lift Tools Pipe Cradle assembly is restricted to
indoor use only.
Platform is restricted to one person when Lift
Tools Pipe Cradles option is in use.
The bottom foot mount of the Lift Tools Pipe
Cradles tube must rest on the platform toe-
board.
Be sure the Lift Tools Pipe Cradles is secured
to the platform.
Lift Tools Pipe Cradle Installation
1
Slide the railing mounting brackets until the
rubber bumper lands on the railings.
2
Tighten the bolts on foot mount bracket.
3
Tighten the bolts on railing mounting brackets.
-1932m Lite
™
First Edition • Third Printing
Part No. 1308591GT
Advertisement
Table of Contents
