Terex GS32MT-101 Operator's Manual page 54

Operator's Manual
Operating Instructions
Lift Tools Work Tray Operation
1 Place the load so that it rests inside the Lift
Tools Work Tray.
The Lift Tools Work Tray assembly weighs
4 lbs/1.8 kg.
Maximum capacity of Lift Tools Work Tray is
50 lbs/23 kg.
Tip-over hazard. The weight of Lift Tools Work
Tray assembly and the load in the Lift Tools
Work Tray assembly will reduce the rated
platform capacity of the machine and must be
factored into the total platform load.
Platform Height Restriction
Instructions
Platform Height Restriction allows the platform to
be limited to a specific height.
Observe and Obey: Platform
Height Restriction
 Read, understand and obey all warnings and
instructions provided with the Platform Height
Restriction.
52 GS -1432m • GS -1932m • GS
™ ™
Platform Height Restriction
Operation
To limit height:
Note: The User Max Height option must be turned
on. See Service and Repair manual.
1 Raise the platform to the desired maximum
height with the platform control.
2 Press and hold the lift function selection button
on the platform control for 5 seconds.
3 The maximum platform height limit is activated
when:
a The platform control LED displays
"LoHt", and
b The alarm beeps 7 times.
4 Perform function tests prior to use.
-1932m Lite
™
First Edition • Third Printing
Part No. 1308591GT