Table of Contents
Advertisement
Operator's Manual
Maintenance
Maintenanc e
Observe and Obey:
Only routine maintenance items specified in
this manual shall be performed by the
operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.
Use only Genie approved replacement parts.
Maintenance Symbols Legend
The following symbols have been used in this
manual to help communicate the intent of the
instructions. When one or more of the symbols
appear at the beginning of a maintenance
procedure, it conveys the meaning below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required to
perform this procedure.
60
GS
-1432m • GS
-1932m • GS
™
™
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in
oil level that might indicate the presence of
hydraulic system problems.
1
Be sure that the machine is on a firm, level
surface, free of obstructions, with the platform
in the stowed position.
2
Visually inspect the oil level in the hydraulic oil
tank.
Result: The hydraulic oil level should be
between the
and
ADD
3
Add oil as needed. Do not overfill.
Hydraulic oil specifications
Hydraulic oil type
Note: For cold weather operation and information
on alternative hydraulic fluids, please refer to the
Genie Scissor Maintenance Manual.
-1932m Lite
™
First Edition • Third Printing
marks on the tank.
FULL
Chevron Rando HD equivalent
Part No. 1308591GT
Advertisement
Table of Contents
