RETAINING STRAP
Make sure that no objects are trapped be-
tween belt and the body!
The retaining strap is not part of the re-
taining system for the wheelchair and/or
the driver during transport in motor vehi-
cles.
The retaining strap [1] resp. [2] is screwed
from the back onto the respective back
support tube.
The retaining strap serves to stabilise the
sitting position and prevents falling forward
out of the wheelchair.
To fasten the retaining strap, pull both ends
forward and audibly let the buckle click into
place.
To open the retaining strap [1], press down
the release button (3) and pull the two ends
of the strap apart.
To open the retaining strap [2], press down
both clips (4) and pull the two ends of the
strap apart.
☞ The retaining straps [1] resp. [2] can be
adjusted in length and should not be
pulled too tight.
1
2
3
4
4
35