Push Bar - Meyra Eurochair2 2.750 Operating Manual

PUSH BAR

Before any actions on the push bar the
wheelchair is to be secured against un-
intentional rolling motions. – View chap-
ter Turning the leg supports to the side on
page 18.
The removable push bar connects the two
back support tubes at the pushing handles
[1], serves to push the wheelchair and at the
same time is the bracket for the head sup-
port.
To remove the push bar or to fold the
wheelchair unscrew one or both of the at-
tachment screws (2) completely.
☞ While doing so protect the push bar
from falling down.
☞ Screw the previously removed screw(s)
back into the tube. – This will ensure
that no screws are lost.
2
1
29