Table of Contents
Advertisement
Removing the leg supports
With removed leg supports there is an in-
creased danger of tilting backwards.
For easy transfer into and out of the wheel-
chair as well as a reduced wheelchair length
(important for transport) the leg supports
can be removed [1].
☞ Remove the calf belt before swivelling
away the leg supports.
☞ Therefore observe chapter Calf belt
on page 15.
For removal first swivel the leg support side-
ways [2] and then remove them toward the
top [1].
☞ Therefore observe chapter Turn-
ing the leg supports to the side on
page 18.
☞ Watch for possible danger of jam-
ming!
Attaching the leg supports
For inserting press the leg supports, swiv-
elled to the side, parallel to the front frame
tube and lower it into place. – In doing so
the holding pin must slide into the frame
tube.
☞ After attachment swivel the leg sup-
ports inward [3].
☞ Therefore observe chapter Swivel-
ling in the leg supports on page 19.
20
1
2
3
Advertisement
Table of Contents
