Height Adjustment Of The Arm Support - Meyra Eurochair2 2.750 Operating Manual

Height adjustment of the arm support

For height adjustment of the arm support
secure the support pad with one hand to
prevent it from falling down.
Danger of jamming during the height ad-
justment of the arm supports between
the wheels and adjustment lever.
Version 1:
(only on model 1.750, 1.850)
The upholstered arm support pads can be
height adjusted in 5 steps [1].
Press down on the pressure button (2) to lift
or lower the padded arm support and at the
same time slide the padded arm support
into the desired height. Afterwards slide the
padded arm support again until it audibly
locks into place.
☞ Check the locking device by trying to
pull or push the padded arm support.
Version 2:
(only on model 2.750, 2.850)
The upholstered arm support pads can be
height adjusted in 5 steps [3].
For lifting or lowering the padded arm sup-
port, pull or press the lever (4) with your fin-
gers and at the same time slide the padded
arm support to the desired height. After-
wards slide the padded arm support again
until it audibly locks into place.
☞ Check the locking device by trying to
pull or push the padded arm support.
2
1
4
3
25