Removing The Arm Support; Inserting The Arm Support - Meyra Eurochair2 2.750 Operating Manual

Removing the arm support

Fold the locking levers (2)+(3) first in order
to remove the arm support.
Afterwards remove the arm support toward
the top [1].

Inserting the arm support

First insert the arm support beside the seat
surface from the top into the guide [4].
Then press the arm support down and swiv-
el the locking lever back down (2) resp. (3).
☞ The rear tube of the arm support must
lie in the guide groove on the back sup-
port (5).
1
4
4
2
3
5
23