Head Support; Therapy Table - Meyra Eurochair2 2.750 Operating Manual

Lightweight wheelchairs
Table of Contents

Advertisement

HEAD SUPPORT

Always adjust the upper edge of the head
support close to the back of the head and
at about eye level.
Do not position the head support at neck
height.
Pull the head support out of the bracket
maximally up to the marking.
The head support solely serves to support
the head during regular use, but it cannot
replace a head support firmly mounted
into an automobile during passenger
transport.
Check the firm seat and functionality of
the head support regularly.
The upper edge of the adjustable head sup-
port [1] should always be close to the back
of the head at about eye level. For height
adjustment and removal of the head sup-
port loosen the clamping screw (2).

THERAPY TABLE

Danger of jamming when sliding on the
therapy table!
Sharp objects (e.g. watches, rings, knives
or belt buckles) as well as coarse dust can
cause unattractive brush marks in the sur-
face of the therapy table.
Do not place any hot objects onto the
therapy table.
Do not drive with the therapy table at-
tached when there are loose objects or
containers with fluids on it.
Do not use aggressive or granular clean-
ing agents to clean the therapy table.
Do not use the therapy table as handle for
carrying the wheelchair.
The therapy table is pushed from the front
over the arm support cushions [3].
34
1
3
☞ Ensure that the therapy plate sits se-
curely on the arm supports pads.
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eurochair 1.850Eurochair 1.750Eurochair2 pro 2.850Eurochair2 xxl 2.850

Table of Contents