Workstation Entry - Baker Bugbox Ax Manual

Workstation Entry

Once the vacuum has been achieved, the Glove Port Handle can now be rotated in either direction
to unlock the Glove Port Cap.
As there is a strong vacuum within the Ezee-Sleeve, removal of the Cap can require a reasonable
amount of force. This can be made easier by pushing the uppermost part of the Handle to first
break the vacuum at the upper edge of the Cap seal.
Figure 21: Glove port cap
The Glove port Cap can now be stored inside the workstation using the locator feature on the rear
of the Cap. These slot into the storage brackets mounted within the workstation.
Page 37 of 55