Contec BX-M2510 Series Reference Manual page 70

 PCH-IO Configuration
Use this menu to configure the operation settings for PCH-IO.
PCH-IO Configuration
Item
HD Audio Configuration
Onboard LAN A Controller
Onboard LAN B Controller
Wake on LAN
Wake on RI (COM1)
Wake on RI (COM2 - 4)
Restore AC Power Loss
— —
BIOS Setup
BX-M2510 Series Reference Manual
Options
Refer to HD Audio
Configuration.
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Power On /
Power Off /
Last State
- 70 -
Description
Configure the controller settings for LAN A.
Configure the controller settings for LAN B.
Configure the Wake on LAN function
settings.
Configure the Wake on RI (COM1) function
settings.
Configure the Wake on RI (COM2 - 4)
function settings.
Set whether to start the system at the same
time the power supply starts.
Power On:
The system will start at the same time the
power supply starts.
Power Off:
Press the power button to start the system.
The system does not start at the same time
the power supply starts.
Last State:
If the power is turned off while the system is
active, the system will start up the next time