Contec BX-M2510 Series Reference Manual page 63

Item
Serial Port 2 Configuration
Item
Serial Port
Device Settings
Serial Port 3 Configuration
Item
Serial Port
Device Settings
Serial Port 4 Configuration
Item
Serial Port
Device Settings
Digital I/O Configuration
Item
GPIO 0
GPIO 1
GPIO 2
GPIO 3
GPIO 4
GPIO 5
—
BIOS Setup
BX-M2510 Series Reference Manual
Options
Options
Disabled / Enabled
IO=2F8h; IRQ=3;
Options
Disabled / Enabled
IO=3E8h; IRQ=7;
Options
Disabled / Enabled
IO=2E8h; IRQ=5;
Options
Input / Output High /
Output Low
- 63 -
—
Description
high/low is necessary.
When this is enabled, hardware controlling
will be automatically performed and it
eliminates software controlling.
This function is only available when "RS-485"
is selected for Mode Select.
It is only performed with the sets listed
below.
8bits data + 1bit parity + 1bit stop
8bits data + 1bit parity + 2bits stop
8bits data + 2bits stop
Description
Configure the operation settings for serial port
2.
Display the device settings.
Description
Configure the operation settings for serial port
3.
Display the device settings.
Description
Configure the operation settings for serial port
4.
Display the device settings.
Description
Configure the operation settings for Digital I/O
(input/output). And, configure the operation
settings for output-level (High/Low).
The value will be undefined until the BIOS
initialization is completed.
Input: Use as a general-purpose input.
Output High: Use as a general-purpose output.
Output Low: Use as a general-purpose output.