Contec BX-M2510 Series Reference Manual page 36

3
Install the disk bracket equipped with the HDD/SSD into the product, and then fix it with
screws. The specified tightening torque is 5kgf⋅cm.
When tightening the screws to fasten the HDD / SSD to the bracket or the HDD mounted

bracket to the product, do not use any tool such as an electric screwdriver, which vibrates the
HDD / SSD. Not doing so will damage the HDD / SSD.
If you use the HDD/SSD other than the optional product, we cannot guarantee the specifications

of this product. If you want to use the product within its specifications, be sure to use the
optional HDD.
To prevent potential damage caused by static electricity, take appropriate anti-static measures

(for example, wearing an anti-static wristband) when inserting or removing the HDD/SSD.
Do not touch the terminals on the HDD/SSD. Doing so may damage the card.

Do not insert the HDD/SSD with the incorrect orientation. Also, do not apply excessive force

when inserting the HDD/SSD. Doing so may damage the connectors.
Before inserting the HDD/SSD, do not drop it or otherwise subject it to strong impacts. Doing so

may lead to malfunctions.
Do not cover BREATING HOLE. Doing so may lead to malfunctions.

—
Hardware Setup
BX-M2510 Series Reference Manual
CAUTION
- 36 -
—