Contec BX-M2510 Series Reference Manual page 57

Create RAID Volume
Create RAID volume.
Create RAID Volume
Item
Name
RAID Level
Select Disks
Stripe Size
Capacity (MB)
Synchronization
▶ Create Volume
Non-RAID Physical Disks
Item
SATA 0.2, XXXXX, XXXGB
SATA 0.3, XXXXX, XXXGB
—
BIOS Setup
BX-M2510 Series Reference Manual
Options
Volume1
RAID0 (Stripe)
RAID1(Mirror)
Recovery
- / X
4KB
8KB
16GB
32KB
64KB
128KB
xxx.xx
On Request
Continuous
-
Options
-
-
- 57 -
—
Description
Set the volume name of RAID volume.
Set the type of RAID volume. Do not set other than
RAID1(Mirror).
Set SATA disk that configures RAID volume.
SATA disk can be specified with [X].
Set the stripe size.
*This is not used with this product.
Set the capacity of RAID volume.
This is displayed when Recovery is selected.
*This is not used with this product.
Create RAID volume.
Description
The type, the serial number, capacity, and state of
SATA disk without RAID setting are displayed.
The type, the serial number, capacity, and state of
SATA disk without RAID setting are displayed.