Contec BX-M2510 Series Reference Manual page 54

 SATA Configuration
Use this menu to specify the SATA controller settings.
SATA Configuration
Item
SATA Controller(S)
SATA Mode Selection
Serial ATA Port 1
Serial ATA Port 2
Write Protect
—
BIOS Setup
BX-M2510 Series Reference Manual
(Actual display may differ)
Options
Enabled / Disabled
AHCI Mode
Intel RST Premium
-
-
Disabled / Enabled
- 54 -
—
Description
Configure the SATA controller operation
settings.
If the settings are changed, the drive on SATA
will not be identified.
Configure SATA disk mode.
When using RAID configurations, change the
settings to "RAID" and refer to the "Software
RAID Setup (page83)" for detailed setup.
Display the information of the disk connected to
SATA1.
Display the information of the disk connected to
SATA2.
Hardware write protect can be respectively
applied to SSD in each port. This is only
available when using SSDs supported by this
product.