Contec BX-M2510 Series Reference Manual page 47

 Key Operations
Use the following keys to operate the setup utility.
Key
Up Arrow
Down Arrow
Left Arrow
Right Arrow
Esc
Enter
+
-
F1
F2
F3
F4
 Getting Help
Press <F1> key to pop up a small help window that describes the appropriate keys to use and the
possible selections for the highlighted item. To exit the Help Window press <Esc> key.
 Exiting Aptio Setup Utility
Use one of the following methods to exit Aptio Setup Utility.
Save Changes and Exit
Save the changed settings and exit Aptio Setup Utility. Restart the system if settings that require a
restart have been changed.
1
Press the <F4> key or select "Save Changes and Exit" in the "Save & Exit" menu screen.
The following message will be displayed.
2
Select ¥[Yes], and press the <Enter> key.
Aptio Setup Utility will close, and the PC will restart.
—
BIOS Setup
BX-M2510 Series Reference Manual
Move to the previous item
Move to the next item
Move to the item on the left (menu bar)
Move to the item on the right (menu bar)
Main Menu: Quit without saving changes
Submenus: Exit Current page to the next higher level menu
Move to the item you desired
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help on Setup navigation keys
Load the previous number from NVRAM.
Load the optimized defaults from BIOS default table
Save all settings changes to the NVRAM and exit
- 47 -
—
Function