Contec XPT-T1000 Series Manual
  1. Manuals
  2. Brands
  3. Contec Manuals
  4. Industrial PC
  5. XPT-T1000 Series
  6. Manual

Contec XPT-T1000 Series Manual

Os pre-installed type
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Manual for OS
Pre-installed Type
(Windows 10 IoT Enterprise 2019 LTSC)
PANEL computer with the high-performance 7th-generation Intel® CPU processor
XPT-T1000 Series
CONTENTS
Introduction .................................................................. 4
Notes Regarding Use .............................................. 10
Setup procedures ..................................................... 17
System Information ................................................. 22
Recovery Method ..................................................... 49
Customer Support and Inquiry ........................... 57

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XPT-T1000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Contec XPT-T1000 Series

Summary of Contents for Contec XPT-T1000 Series

  • Page 1 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) PANEL computer with the high-performance 7th-generation Intel® CPU processor XPT-T1000 Series CONTENTS Introduction ..............4 Notes Regarding Use ..........10 Setup procedures ............. 17 System Information ..........22 Recovery Method ............. 49...

  • Page 2: Table Of Contents

    Introduction ............... 4 1. About the Product ..............................5 2. Related Manuals ..............................6 3. Manual composition ............................. 7 4. CONTEC Software License ........................... 8 Notes Regarding Use ............10 1. Safety Information ............................... 11 2. Handling Precautions ............................12 3.
  • Page 3 Table of Contents 2. About mouse cursor ............................ 48 Recovery Method ............49 1. Preparations ................................50 2. Procedure ................................51 1. BIOS settings ..............................51 2. OS installation ..............................54 3. BIOS settings ..............................55 4. Start OS ................................56 Customer Support and Inquiry ........

  • Page 4: Introduction

    Introduction This will inform you of the information you need to know before using this product, such as an overview of the OS equipped with preinstalled type, overall configuration of this manual, the various manuals associated with this product, and so on. —...

  • Page 5: About The Product

    1. About the Product Windows 10 IoT Enterprise 2019 LTSC, equipped with the preinstalled type, is the OS for embedded applications. CONTEC’s preinstalled types perform customization to build the OS based on a configuration determined in advance. In this manual you will find basic information on the installed OS, as well as explanations of setup procedures and recovery procedures.

  • Page 6: Related Manuals

    Windows software. Reference Manual Download from Read this when operating the This describes the hardware aspects the Contec product. such as functions and settings. website (PDF) Manual for OS Download from Must read this after opening the...

  • Page 7: Manual Composition

    — — Introduction XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 3. Manual composition This manual is composed as follows: — 7 —...

  • Page 8: Contec Software License

    The copyright, patent right or any other intellectual property right pertaining to the Software or any documentary attachments, such as manuals, as well as any copies thereof (the “Software and the Like”) shall belong to CONTEC, and customers shall have no rights therefor other than those expressly authorized herein.
  • Page 9 XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) Article 6. Termination 1.CONTEC may terminate the Agreement with immediate effect without any notice or demand to the customer if the customer fails to comply with any of the provisions herein.

  • Page 10: Notes Regarding Use

    Notes Regarding Use This manual explains the precautions for using the product safely. Please make sure to read this before using this product. — 10 —...

  • Page 11: Safety Information

    — — Notes Regarding Use XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 1. Safety Information This document provides safety information using the following symbols to prevent accidents resulting in injury or death and the destruction of equipment and resources. Understand the meanings of these labels to operate the equipment safely.

  • Page 12: Handling Precautions

    Even when using the product continuously, be sure to read the manual in the CONTEC’s website and understand the contents. Do not modify the software. CONTEC will bear no responsibility for any problems, etc.,  resulting from modifying the software.

  • Page 13: About Adobe Flash Player

    — — Notes Regarding Use XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 3. About Adobe Flash Player Adobe Flash Player is disabled by default. You may require a license from Adobe Systems Incorporated or the partner of Adobe.to use the service.

  • Page 14: About Unified Write Filter

    — — Notes Regarding Use XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 4. About Unified Write Filter Unified Write Filter function (referred to as “UWF” in this document) is the new filtering which combined EWF, FBWF, and Registry filter. UWF has deterred the write to DISK by redirecting the write to DISK from operating system or application to overlay.
  • Page 15 — — Notes Regarding Use XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) As the application software used by a user or Windows operation can be affected, it is necessary to restart Windows in accordance with a system application, and to release a UWF overlay region.

  • Page 16: Security Warning

    — — Notes Regarding Use XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 5. Security Warning When connecting to the network, be aware of security-related problems. See the examples of Security measures below and set up the product properly along with the network devices. 1.

  • Page 17: Setup Procedures

    Setup procedures This manual describes the setup procedure that a user needs to perform after unpacking the product with a pre-installed operation system. The setup of Windows is performed interactively. — 17 —...

  • Page 18: Windows Setup

    — — Setup procedures XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 1. Windows setup Check that the monitor, the keyboard and the mouse are connected with the PC. Do not connect other devices until a Windows setup is completed. After confirming the connections, turn on the PC power.
  • Page 19 — — Setup procedures XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) Select your home region. And, click the Select keyboard layout. And, click the Select additional keyboard layout. If not, click the Skip — 19 —...
  • Page 20 — — Setup procedures XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) It is a document regarding License. Click the Accept Then, the display of creating account can be viewed. Enter the account name to be used. Click the Next Then, the display of creating password can be...
  • Page 21 — — Setup procedures XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) It is a setup regarding OS operation. Click the It is a setup regarding OS operation. Click the Accept 10. When a password setting is skipped, an automatic logon can be made by the created account (user name).

  • Page 22: System Information

    System Information Explains the preinstalled type’s basic system information and main device driver versions, etc. — 22 —...

  • Page 23: Basic Information

    Update Version:11.0.126(KB4505050) Windows Media Player 12.0.17763.475 Microsoft .NET Framework 4.7.2 Remote Desktop Connection 10.0.17763 Remote Desktop Protocol 10.6 CONTEC utilities CONTEC Manager 4.0.2 TPBK(S) 3.05 Supply schedule Mainstream support end date 2024/01/09 Extended support end date 2029/01/09 End of Life 2028/11/30 —...

  • Page 24: Storage And Partition Configuration

    — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 2. Storage and Partition Configuration The following is for a 2.5” HDD type with 100 GB * The disk usage indicated is a reference value. —...
  • Page 25 — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) The following is for a 2.5” SDD type with 256 GB * The disk usage indicated is a reference value. — 25 —...

  • Page 26: Programs And Features

    — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 3. Programs and Features 1. Installed software View a list of installed software 2. Installed updates View a list of installed updates. — 26 —...

  • Page 27: Enable Or Disable Windows Functions

    Internet to perform setup, or recover the preinstalled type. Under CONTEC preinstalled type factory default settings, Device Lockdown is enabled. Using the lockdown function, you can restrict unintentional user operations or control information displayed on the screen.

  • Page 28: Uwf Settings

    4. UWF settings For UWF settings, use either the Microsoft console application UWF manager (uwfmgr.exe) or CONTEC Manager, the GUI application installed in the preinstalled type. The UWF function’s filter is disabled by default. The following explains the procedure for checking the UWF settings using UWF manager (uwfmgr.exe).
  • Page 29 — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) When UWF is enabled, writing to the disk will be restricted, allowing for the lifetime of disks with writing restrictions to be lengthened. It also allows you to prevent unintentional system alterations. Below is a configuration graph of the UWF functions.
  • Page 30 — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) Input “uwfmgrget-config” and press the [Enter] key. View current setting status. Item Display Meaning Enter the Filter state Disabling the command Enabling the Check the state Volume state Un-protected Invalid Volume...

  • Page 31: Main Device Drivers

    — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 4. Main device drivers Category Data IDE ATA/ATAPI Controller Display Adapter Network Adapter — 31 —...
  • Page 32 — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) Sound video and game controller System devices — 32 —...
  • Page 33 — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) Universal Serial Bus Controller — 33 —...

  • Page 34: Set To Factory Default Values

    — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 5. Set to factory default values This section explains the preinstalled type’s various factory default settings. You can reset these settings unless their values are specially designated. 1.

  • Page 35: Ethernet Settings

    — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 2. Ethernet settings The preinstalled type’s product Ethernet display and the OS Ethernet recognition status are shown below. Product Ethernet display OS Ethernet recognition LAN A Ethernet LAN B...

  • Page 36: Serial Port Settings

    — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) [Internet Protocol Version 6] IP address : automatically DNS : automatically 3. Serial Port Settings The preinstalled type’s product SERIAL display and OS SERIAL recognition status are shown below. Product SERIAL display OS SERIAL recognition Remarks...

  • Page 37: Optional Power Settings

    — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 4. Optional power settings This section explains the factory settings for power options. Power and sleep button settings When I press the power button : Shut down Shutdown settings Turn on fast startup(recommended) : Off Advanced settings...

  • Page 38: Changing The Language

    — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 6. Changing the language The preinstalled type supports English, Japanese, Korean and Simplified Chinese. The following explains how to manually change the language settings. As an example we will explain the procedure for switching from English to Japanese.
  • Page 39 — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) Input “JAPAN” in the textbox, and a list will appear below. Select [日本語 (Japanese)], and then click [Next]. The language function’s installation screen will be displayed, but it is already installed.
  • Page 40 — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) In order to change the display language during startup and shutdown to Japanese, you also need to perform the following settings. In Control Panel, click [時計と地域 (Clock and Region)], then click [地域...
  • Page 41 — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 10. Confirm the contents, then click [今すぐ再起動 (Restart now)] to restart the system and complete the settings. — 41 —...

  • Page 42: Windows Update

    — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 7. Windows Update You can install the correction program (QFE) in [Update & Security]. On the [Start] menu, click [Settings]. Click [Update & Security]. —...

  • Page 43: Contec Manager

    CONTEC provides not only functions installed with this product such as the RAS function to secure reliability and the UWF function providing the OS, but also setting tools that allow you to use CONTEC products more smoothly and a library to control the functions listed below.

  • Page 44: How To Start

    XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 2. How to start CONTEC Manager is run from the service application (CoRasSvr.exe) when you sign in to Windows and remains in the task tray. The following icon will appear in the task tray. Move the cursor over the icon and double-click on it to display the properties screen.

  • Page 45: Properties Screen

    — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 3. Properties screen *The following images may differ from the actual product. Monitor hardware status such as the CPU temperature, the M/B temperature and so on. If it exceeds the set threshold, the set alarm action will be activated.

  • Page 46: Uwf Settings

    — — System Information XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 4. UWF settings The following explains the method for setting write protection for the C drive. ① Click [ ] and set to [ ②...

  • Page 47: About Touch Panel

    After the shipment, the touch coordinates may have moved. Therefore, please execute a calibration setting. Please follow the procedure below. ① Start [Windows Start] - [CONTEC Tools] - [Touch Panel Calibration Utility]. ② Press [START] button and touch the center of the cross shown on the screen.

  • Page 48: About Mouse Cursor

    2. About mouse cursor When performing touch-inputs without connecting a mouse device, a mouse cursor will not appear. To display a mouse cursor, the Virtual mouse driver" offered by CONTEC is necessary. Please download it from the CONTEC website. — 48 —...

  • Page 49: Recovery Method

    Recovery Method This chapter explains how to recover the OS in the event that it is unable to start in the preinstalled type. — 49 —...

  • Page 50: Preparations

    — — Recovery Method XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 1. Preparations This document describes the recovery procedures in a case where OS becomes unable to start up on a preinstalled-OS system. The Recovery uses USB connection’s DVD-ROM Drive. Please prepare a necessary equipment according to DVD-ROM used.

  • Page 51: Procedure

    — — Recovery Method XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 2. Procedure Before performing the operation, connect the USB keyboard, USB mouse and USB DVD-ROM drive to the product. 1. BIOS settings Please set recovery media (Disc 1 of 2) to a USB DVD-ROM drive, and connect with PC. Turn on the power supply of PC and Press [DEL] key or [ESC] key immediately after turning on the power, activating Aptio Setup Utility.
  • Page 52 — — Recovery Method XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) Press [F4] key, select [Save & Exit Setup]. Aptio Setup Utility - Copyright © 2018 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Please [ENTER] key If you save configuration.
  • Page 53 — — Recovery Method XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) Press [→] key, select Advanced menu. Aptio Setup Utility - Copyright © 2018 American Megatr Advanced Intel® RST XX.X.X.XXXX RAID Driver Press [↓] key, select “Intel（R）Raid Storage ▶...

  • Page 54: Os Installation

    (If you do not continue the recovery, press N key.) HDD/SSD initialization and recovery CImage Tool for Windows processing will be performed automatically. Copyright<C> 2017 CONTEC CO., LTD. Version X.X.X.X Copy swm file: xxxxx.swm [xx%] copied The screen on the left will appear. Take out the CImage Tool for Windows Copyright<C>...

  • Page 55: Bios Settings

    — — Recovery Method XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 3. BIOS settings After restarting the system by the method outlined above, immediately press [DEL] or [ESC] to start the BIOS settings screen (Aptio Setup Utility). Press the [→] key to select the “Advanced”...

  • Page 56: Start Os

    — — Recovery Method XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 4. Start OS The screen of the left figure is displayed after several times reboot. Perform Windows setup following the setup procedure in this manual. —...

  • Page 57: Customer Support And Inquiry

    Customer Support and Inquiry CONTEC provides the following support services for you to use CONTEC products more efficiently and comfortably. — 57 —...

  • Page 58: Services

    — Customer Support and Inquiry XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) 1. Services CONTEC offers the useful information including product manuals that can be downloaded through the CONTEC website. Download https://www.contec.com/download/ You can download updated driver software, firmware, and differential manuals in several languages.
  • Page 59 No part of this document may be copied or reproduced in any form by any means without  prior written consent of CONTEC CO., LTD. CONTEC CO., LTD. makes no commitment to update or keep current the information contained  in this document.
  • Page 60 3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan https://www.contec.com/ No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD. XPT-T1000 Manual for OS Pre-installed Type (Windows 10 IoT Enterprise 2019 LTSC) NA06672 (LYWX571)

Table of Contents