Gpio Connector: Dio - Contec BX-M2510 Series Reference Manual

11. GPIO Connector: DIO

This product is equipped with the remote power switch and 6 ports for non-isolated general I/O. *
* CONTEC Manager is necessary to use the General I/O. (It is already installed for the product OS
pre-installed type when shipped from the factory.)
CONTEC Manager can be downloaded through the CONTEC's Web site. For more detailed
information, contact your retailer.
GPIO connector
Connector used on the product
Pin No.
1
2
3
4
5
6
7
8
9
GPIO connector specifications
Item
The number of inputs and
outputs
Input section
Input format
Output section
Output format Non-isolated 5VTTL level
Output rating 5VDC 12mA
—
Product Nomenclature and Function
BX-M2510 Series Reference Manual
Signal Name
POWER
SW(+)
Remote power switch
Contacting + and - makes the operation act like POWER SW.
POWER
SW(-)
GND Ground
GPIO0
GPIO1
GPIO2
General I/O
Inputs or Outputs can be selected for each pin.
GPIO3
GPIO4
GPIO5
6 (Inputs or Outputs selectable with BIOS settings)
Non-isolated 5VTTL level
(positive logic, 5V standby -10KΩ pull-up within)
(positive logic, 5V standby -10KΩ pull-up within)
—
9-pin D-SUB (Female)
Description
Specification
- 28 -